To program your DirecTV remote to control your LG TV, follow these steps:
1. Turn on Your LG TV
Ensure your LG TV is powered on before starting the programming process.
2. Put the Remote in TV Mode
– Press and hold the TV button on your DirecTV remote until the green light at the top of the remote stays on, then release the TV button.
– The green light should remain on.
3. Enter the Programming Code
– Press and hold the Select and Mute buttons at the same time until the green light blinks and then stays on.
– Enter the 5-digit code for LG TVs. You can try the following common codes:
– 10178
– 11423
– 10856
– 10030
– After entering the code, the green light should blink and turn off.
4. Test the Remote
– Point the DirecTV remote at the LG TV and press the Power button.
– If the TV turns off, the programming was successful. If not, repeat the process with another code.
5. Manual Code Search (if needed)
If none of the codes work, you can perform a manual code search:
1. Turn on the TV.
2. Press and hold the TV button until the green light stays on.
3. Press and release the On Demand button. The remote will begin searching for a code.
4. The green light will blink and then stay on again once the code is found.
5. Press the Select button to store the code.
After this, your DirecTV remote should control your LG TV’s power and basic functions like volume and channel control.
