How to Install a Reverse Camera on a Pioneer AVH-120BT- A Step-by-Step Guide

How to Install Reverse Camera on Pioneer AVH-120BT

Installing a reverse camera on your Pioneer AVH-120BT head unit can greatly enhance your driving experience by providing a clear view of what’s behind your vehicle when reversing. This article will guide you through the process of installing a reverse camera on your Pioneer AVH-120BT, ensuring a seamless integration and a safer driving experience.

Step 1: Gather the Necessary Tools and Materials

Before you begin the installation process, gather all the necessary tools and materials. You will need the following:

– Pioneer AVH-120BT head unit
– Reverse camera
– Camera mount
– Power and ground wires
– Soldering iron and solder
– Heat shrink tubing
– Wire strippers
– Screwdriver
– Optional: a crimping tool

Step 2: Locate the Reverse Camera Input

Open the back cover of your Pioneer AVH-120BT head unit to locate the reverse camera input. The input is typically a female RCA jack labeled “REVERSE” or “RCA IN.”

Step 3: Connect the Reverse Camera

Connect the reverse camera to the head unit by plugging the camera’s RCA plug into the reverse camera input. Make sure the connection is secure.

Step 4: Install the Camera Mount

Choose a suitable location on your vehicle where you can mount the reverse camera. This location should provide a clear view of the rear area when reversing. Attach the camera mount to the vehicle using the provided screws and bolts.

Step 5: Run the Wires

Run the power and ground wires from the camera to the head unit. You can either solder the wires together or use a crimping tool to connect them. Ensure that the wires are protected with heat shrink tubing to prevent any damage.

Step 6: Connect the Wires to the Head Unit

Connect the power and ground wires to the appropriate terminals on the back of the head unit. The power wire should be connected to the power terminal, and the ground wire should be connected to the ground terminal. Double-check the connections to ensure they are secure.

Step 7: Test the System

Reinstall the head unit and connect the power to your vehicle. Turn on the ignition and select the reverse gear. The reverse camera should now be active, and you should see a clear view of the rear area on your head unit’s screen.

Step 8: Finalize the Installation

Secure the head unit in its mounting bracket and make any necessary adjustments to the camera mount. Double-check all connections and ensure that everything is working correctly.

Congratulations! You have successfully installed a reverse camera on your Pioneer AVH-120BT head unit. This addition will make reversing your vehicle safer and more convenient.