To program a DIRECTV RC73 remote, follow these steps to pair it with your DIRECTV receiver or compatible devices:
1. Turn on Your TV and Receiver
– Ensure your DIRECTV receiver is powered on, and your TV is also on.
2. Prepare the RC73 Remote
– Insert the required batteries (if not already done).
3. Enter Pairing Mode
– On the RC73 remote, press and hold the `MUTE` and `ENTER` buttons simultaneously until the green light at the top of the remote turns on (about 3 seconds), then release both buttons.
4. Program the Remote
– The green light should remain on. Now press and release the `TV POWER` button on the remote. The green light should blink and turn off.
– Next, press and hold the `SELECT` button until the green light flashes and turns off.
5. Enter the 5-Digit Code
– The remote will automatically try to find the correct code for your TV. If the TV turns off during this step, it means the remote has successfully been paired. If the TV doesn’t turn off, you may need to try additional steps:
– For some TV brands, there might be a list of codes you can enter manually. Check the DIRECTV code list, typically available on the DIRECTV website, to find the specific 5-digit code for your TV brand.
– Once you know the code, enter it using the numeric keypad on the remote.
6. Test the Remote
– After programming, test if the remote can control the TV (e.g., adjust the volume, power it on/off).
– If it doesn’t work, repeat the process with a different code.
7. Program for Other Devices (Optional)
– You can also program the RC73 to control other devices like an AV receiver or a soundbar. Repeat the process for each device type, but instead of the `TV POWER` button, press the relevant device button (like `AV1`, `AV2`, etc.).
By following these steps, your RC73 remote should be programmed to work with your DIRECTV receiver and TV. If you have difficulty, the DIRECTV website offers troubleshooting guides and code lookup tools to assist further.
