To connect a DIRECTV remote to your receiver, follow these steps:
1. Turn on Your TV and DIRECTV Receiver:
Make sure both your TV and DIRECTV receiver are powered on.
2. Activate the Remote:
If you have a new remote, remove the battery tab to activate it. If you already have a remote that’s not working, make sure the batteries are fresh and inserted correctly.
3. Enter the Setup Mode:
– Press and hold the `MUTE` and `SELECT` buttons on your remote at the same time until the green light at the top of the remote blinks twice and then stays on. This indicates the remote is in setup mode.
4. Program the Remote:
– For most DIRECTV remotes, you can program it automatically by pressing the `1`, `2`, or `3` button on the remote, which corresponds to the receiver you want to pair with. Then press the `SELECT` button. The remote should begin the automatic programming process.
– If it doesn’t work, you can try the manual programming method:
– Press and release the `MENU` button on the remote. Then follow the on-screen instructions that will appear on your TV.
5. Test the Remote:
After programming, try pressing some buttons like `POWER`, `VOLUME`, and `CHANNEL UP/DOWN` to ensure the remote is controlling both your TV and DIRECTV receiver.
6. Finish Setup:
If the remote works as expected, you’re all set. If not, repeat the steps or refer to your DIRECTV receiver’s troubleshooting guide.
Let me know if you need more specific instructions depending on the model of your remote or receiver!
