To set up your DIRECTV remote, you can follow these steps based on the type of remote you’re using. Generally, there are two main types: the standard DIRECTV remote and the Genie remote. Here’s how to program them:
For Standard DIRECTV Remote (RC73, RC66, or similar):
1. Turn on your TV and DIRECTV Receiver.
2. Press and hold the “TV” button on the remote until the green light at the top of the remote turns on, then release the button.
3. Press and release the “Power” button on the remote. The green light will blink and then remain on.
4. Enter the code for your TV brand using the number buttons on the remote. You can find the code list for various TV brands in the DIRECTV manual or on the DIRECTV website. If you enter a valid code, the green light will turn off. If the code is incorrect, the green light will blink and remain on, and you’ll need to try another code.
5. Test the remote by pressing the “Power” button. If the TV turns off, the remote is successfully paired. If it doesn’t, repeat the process with a different code.
For DIRECTV Genie Remote (RC73 or newer):
1. Turn on your TV and DIRECTV Receiver.
2. Press and hold the “Select” and “Mute” buttons on the remote at the same time until the green light at the top of the remote flashes twice, then release both buttons.
3. Press and release the “TV Power” button. The green light will blink and remain on.
4. Enter the code for your TV brand. After entering the correct code, the green light will turn off.
5. Test the remote by pressing the “Power” button to see if the TV turns off. If it does, the remote is programmed successfully. If not, repeat the process using a different code.
If the Code Search Method Is Needed:
If you don’t have the code for your TV, you can use the code search method:
1. Turn on your TV.
2. Press and hold the “TV” button on the remote until the green light turns on, then release the button.
3. Press and release the “Power” button. The green light will blink and then remain on.
4. Press and release the “Enter” button. The remote will search for the code. This may take a few minutes.
5. Test the remote after the process completes to see if it controls the TV.
Resetting the Remote:
If you ever need to reset your remote, follow these steps:
1. Press and hold the “Mute” and “Select” buttons until the green light at the top of the remote blinks twice, then release the buttons.
2. The remote is now reset to its default settings.
By following these steps, your DIRECTV remote should be set up and ready to control your TV.
