To set up your DIRECTV remote to control your TV, follow these steps:
1. Turn on your TV: Make sure your TV is powered on before starting the setup process.
2. Find the TV Brand Code: You will need to know the brand of your TV (e.g., Samsung, LG, Sony) to enter the correct code. You can find a list of TV codes in the DIRECTV remote manual or on the DIRECTV website.
3. Press and Hold the “TV” Button: On your DIRECTV remote, press and hold the “TV” button at the top of the remote until the red indicator light at the top turns on. Release the “TV” button once the red light stays on.
4. Enter the Code: Using the number pad on the remote, enter the 3-digit code for your TV brand. The red light will blink and turn off once the code is entered correctly.
5. Test the Remote: Point the remote at the TV and press the “Power” button. If the TV turns off, the setup is complete. If the TV does not turn off, repeat steps 3 and 4 with a different code from the list for your TV brand.
6. Automatic Code Search (if needed): If you cannot find the correct code, you can use the remote’s automatic code search feature:
– Press and hold the “TV” button until the red light stays on, then release the “TV” button.
– Press and release the “On/Off” button. The red light will blink and then stay on.
– Press and release the “Channel Up” button repeatedly until the TV turns off. This may take several attempts, so be patient.
– Once the TV turns off, press “Enter” to store the code.
After completing these steps, your DIRECTV remote should be set to control your TV. If it doesn’t work, check the code list again or repeat the automatic code search.
