Step-by-Step Guide to Installing a Magnetic Door Stopper for Easy Door Control

How to Install a Magnetic Door Stopper

Installing a magnetic door stopper is a simple and effective way to prevent doors from swinging open too far or hitting walls. This guide will walk you through the steps to install a magnetic door stopper in your home or office.

Materials Needed:

Before you begin, gather the following materials:
– Magnetic door stopper
– Screwdriver
– Level
– Pencil
– Drill and drill bits
– Wood screws

Step 1: Choose the Right Location

Select a location on the door frame where the magnetic door stopper will be installed. The ideal spot is about 3 to 4 inches from the top of the door, on the edge of the door frame. Make sure the location is level and free of any obstructions.

Step 2: Mark the Installation Points

Using a pencil, mark the two points on the door frame where the wood screws will be inserted. These marks should be about 1/2 inch from the edge of the door frame and directly above the magnetic door stopper.

Step 3: Pre-drill the Holes

Using a drill and a drill bit that matches the size of the wood screws, pre-drill the holes at the marked points. This will prevent the wood from splitting when you insert the screws.

Step 4: Install the Magnetic Door Stopper

Attach the magnetic door stopper to the door by aligning the holes in the stopper with the pre-drilled holes in the door. Insert the wood screws into the holes and tighten them securely using a screwdriver. Make sure the door stopper is level and firmly attached to the door.

Step 5: Attach the Door Frame Mount

Position the door frame mount on the door frame, aligning it with the magnetic door stopper. Mark the holes on the door frame mount and pre-drill the holes as you did for the door. Insert the wood screws into the door frame mount and tighten them securely.

Step 6: Test the Magnetic Door Stopper

Open and close the door a few times to ensure that the magnetic door stopper is working correctly. The door should stop at the desired angle without hitting the wall or swinging open too far.

Conclusion

Installing a magnetic door stopper is a quick and easy project that can help protect your walls and ensure the safety of your home or office. By following these simple steps, you can enjoy a door that stops at the perfect angle every time.