How to Install Door Lever Handle
Installing a door lever handle is a relatively simple task that can enhance the appearance and functionality of your door. Whether you’re replacing an old handle or installing a new one, following these steps will ensure a successful installation. In this article, we’ll guide you through the process of installing a door lever handle step by step.
Materials and Tools Needed
Before you begin, gather the following materials and tools:
– Door lever handle kit (including the lever handle, mounting screws, and any necessary adaptors)
– Screwdriver (flat-head or Phillips-head, depending on the screws)
– Pliers
– Tape measure
– Safety glasses
– Gloves
Step 1: Prepare the Door
1. Remove the old door lever handle by unscrewing the mounting screws. If the handle is stubborn, use pliers to gently twist the handle until it comes loose.
2. Clean the area where the old handle was mounted to ensure a smooth installation of the new lever handle.
3. Check the door edge for any damage or wear. If necessary, sand the area to create a flat, even surface for the new handle.
Step 2: Measure and Mark the Mounting Location
1. Use a tape measure to determine the distance from the door edge to the center of the mounting hole for the lever handle.
2. Mark the location on the door edge with a pencil or marker. This will serve as a guide for drilling the mounting hole.
Step 3: Drill the Mounting Hole
1. Put on safety glasses and gloves to protect yourself from debris.
2. Using a drill bit that matches the diameter of the mounting screw, drill a hole at the marked location. Ensure the drill bit is perpendicular to the door edge for a clean, straight hole.
Step 4: Install the Mounting Plate
1. Insert the mounting plate into the drilled hole and secure it with the provided mounting screws. Tighten the screws using a screwdriver, but be careful not to overtighten, as this may damage the door or the mounting plate.
Step 5: Attach the Door Lever Handle
1. Slide the door lever handle onto the mounting plate, ensuring that the handle is positioned correctly.
2. Secure the handle to the mounting plate using the provided screws. Tighten the screws with a screwdriver, but again, be careful not to overtighten.
Step 6: Test the Door Lever Handle
1. Gently pull on the door lever handle to ensure it moves smoothly and securely.
2. Check that the door opens and closes properly with the new lever handle.
Congratulations! You’ve successfully installed a door lever handle. With this new addition, your door will look updated and functional. If you encounter any issues during the installation process, refer to the manufacturer’s instructions or consult a professional for assistance.
